TD62164AP/af 2001-07-16 1 toshiba bipolar digital integrated circuit silicon monolithic TD62164AP,td62164af 4ch high ? current darlington sink driver the TD62164AP and td62164af are high ? voltage, high ? current darlington drivers comprised of four npn darlington pairs. all units feature integral clamp diodes for switching inductive loads. applications include relay, hammer, lamp and stepping moter drivers. please observe the thermal condition for using. features output current (single output) 700 ma (max) high sustaining voltage output 50 v (min) output clamp diodes input compatible with ttl and 5 ? v cmos gnd and sub terminal heat sink package type ? ap : dip ? 16 pin package type ? af : hsop ? 16 pin pin connection (top view) TD62164AP td62164af weight dip16 ? p ? 300 ? 2.54a : 1.11 g (typ.) hsop16 ? p ? 300 ? 1.00 : 0.50 g (typ.) schematics (each driver) note: the input and output parasitic diodes cannot be used as clamp diodes.
TD62164AP/af 2001-07-16 2 maximum ratings (ta = 25c) characteristic symbol rating unit supply voltage v cc ? 0.5~17 v output sustaining voltage v ce (sus) ? 0.5~50 v output current i out 700 ma / ch input current i in 50 ma input voltage v in 17 v clamp diode reverse voltage v r 50 v clamp diode forward current i f 700 ma ap 1.47 / 2.7 (note 1) operating temperature af p d 0.9 / 1.4 (note 2) w operating temperature t opr ? 40~85 c storage temperature t stg ? 55~150 c note 1: on glass epoxy pcb (50 50 1.6 mm cu 50%) note 2: on glass epoxy pcb (60 60 1.6 mm cu 30%) recommended operating conditions (ta = ? 40~85c) characteristic symbol condition min typ. max unit supply voltage v cc 4.5 D 5.5 v output sustaining voltage v ce (sus) 0 D 50 v dc 1 circuit, ta = 25c 0 D 570 duty = 10% 0 D 570 ap duty = 50% 0 570 duty = 10% 0 D 570 output current af i out t pw = 25 ms 4 circuit ta = 85 c t j = 120 c duty = 50% 0 D 480 ma / ch v in 0 D 15 v h fe = 150 10.0 D 15 output on v in (on) i out = 500 ma h fe = 2000 2.4 D 15 input voltage output off v in (off) 0 D 0.4 v input current i in 0 D 20 ma clamp diode reverse voltage v r D D 50 v clamp diode forward current i f D D 500 ma ap ta = 85c (note 1) D D 1.4 power dissipation af p d ta = 85c (note 2) D D 0.7 w note 1: on glass epoxy pcb (50 50 1.6 mm cu 50%) note 2: on glass epoxy pcb (60 30 1.6 mm cu 30%)
TD62164AP/af 2001-07-16 3 electrical characteristics (ta = 25c) characteristic symbol test cir ? cuit test condition min typ. max unit v ce = 50 v, ta = 25c D D 50 output leakage current i cex 1 v ce = 50 v, ta = 85c D D 100 a i out = 500 ma, v cc = 5 v D D 0.8 collector ? emitter saturation voltage v ce (sat) 2 i out = 200 ma, v cc = 5 v D D 0.45 v dc current transfer ratio h fe 2 v ce = 2 v, i out = 500 ma 2000 D D i out = 500 ma, h fe = 150 7.0 D 10.0 input voltage (output on) v in (on) 3 i out = 500 ma, h fe = 2000 1.8 D 2.4 v v r = 50 v, ta = 25c D D 50 clamp diode reverse current i r 4 v r = 50 v, ta = 85c D D 100 a clamp diode forward voltage v f 5 i f = 500 ma D D 2.0 v output on i cc (on) v cc = 5.5 v, v in = 2.4 v D 35 40 ma / ch supply current output off i cc (off) 6 v cc = 5.5 v, v in = 0.4 v D D 10 a input capacitance c in D v in = 0, f = 1 mhz D 15 D pf turn ? on delay t on D 0.2 0.4 turn ? off delay t off 7 v out = 50 v, r l = 72 ? v cc = 5.0 v, c l = 15 pf D 4.0 8.0 s test circuit 1. i cex 2. h fe , v ce (sat) 3. v in (on) 4. i r 5. v f 6. i cc (on) , i cc (off) 7. t on , t off note 1: pulse width 50 s, duty cycle 10% output impedance 50 ? , tr 5ns, tf 10 ns note 2: c l includes probe and jig capacitance. precautions for using this ic does not include built-in protection circuits for excess current or overvoltage. if this ic is subjected to excess current or overvoltage, it may be destroyed. hence, the utmost care must be taken when systems which incorporate this ic are designed. utmost care is necessary in the design of the output line, v cc , common and gnd line since ic may be destroyed due to short ? circuit between outputs, air contamination fault, or fault by improper grounding. in i out i fe h
TD62164AP/af 2001-07-16 4
TD62164AP/af 2001-07-16 5
TD62164AP/af 2001-07-16 6 package dimensions dip16 ? p ? 300 ? 2.54a unit : mm weight: 1.11 g (typ.)
TD62164AP/af 2001-07-16 7 package dimensions hsop16 ? p ? 300 ? 1.00 unit : mm weight: 0.50 g (typ.)
TD62164AP/af 2001-07-16 8 toshiba is continually working to improve the quality and reliability of its products. nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. it is the responsibility of the buyer, when utilizing toshiba products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such toshiba products could cause loss of human life, bodily injury or damage to property. in developing your designs, please ensure that toshiba products are used within specified operating ranges as set forth in the most recent toshiba products specifications. also, please keep in mind the precautions and conditions set forth in the ?handling guide for semiconductor devices,? or ?toshiba semiconductor reliability handbook? etc.. the toshiba products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). these toshiba products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (?unintended usage?). unintended usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. unintended usage of toshiba products listed in this document shall be made at the customer?s own risk. the products described in this document are subject to the foreign exchange and foreign trade laws. the information contained herein is presented only as a guide for the applications of our products. no responsibility is assumed by toshiba corporation for any infringements of intellectual property or other rights of the third parties which may result from its use. no license is granted by implication or otherwise under any intellectual property or other rights of toshiba corporation or others. the information contained herein is subject to change without notice. 000707eb a restrictions on product use
|
